SSD (Solid state drive), 240 GB, intern, Datahastighed: 545 MBps (læs) / 430 MBps (skriv), IOPS: op til 37000 (læs) / op til 63000 (skriv), M.2 2280 (80mm), SATA-600 NB! Leveres retail, dog, uden data- og strømkabler og mounting frame, se listen "Tilbehør".
| Produktbeskrivelse | WD Green PC SSD WDS240G2G0B - solid state drive - 240 GB - SATA 6Gb/s |
| Type | Solid state drive - intern - DEVSLP SATA lavstrømsmodus |
| Kapacitet | 240 GB |
| NAND Flashhukommelses-type | Tredobbelt-niveau celle (TLC) |
| Model | M.2 2280 |
| Grænseflade | SATA 6Gb/s |
| Dataoverførselshastighed | 600 MBps |
| Egenskaber | DEVSLP SATA lavstrømsmodus, S.M.A.R.T. |
| Dimensioner (B x D x H) | 22 mm x 80 mm x 1.5 mm |
| Vægt | 6.51 g |
| Producentgaranti | 3 års garanti |
Generelt | |
|---|---|
| Enhedstype | Solid state drive - intern |
| Kapacitet | 240 GB |
| NAND Flashhukommelses-type | Tredobbelt-niveau celle (TLC) |
| Model | M.2 2280 |
| Grænseflade | SATA 6Gb/s |
| Egenskaber | DEVSLP SATA lavstrømsmodus, S.M.A.R.T. |
| Bredde | 22 mm |
| Dybde | 80 mm |
| Højde | 1.5 mm |
| Vægt | 6.51 g |
Præstation | |
|---|---|
| Overføringshastighed, drev | 600 MBps (ekstern) |
| Intern datahastighed | 545 MBps |
Driftssikkerhed | |
|---|---|
| MTBF (forventet tid mellem fejl) | 1,000,000 timer |
Ekspansion og forbindelse | |
|---|---|
| Interface | 1 x SATA 6 Gb/s - M.2 Card |
| Kompatibel bås | M.2 2280 |
Effekt | |
|---|---|
| Strømforbrug | 80 mW (aktiv) 2800 mW (læs) 2800 mW (skriv) 30 mW (sov) 10 mW (DevSleep) |
Programmer & Systemkrav | |
|---|---|
| Med software | WD SSD Dashboard |
Diverse | |
|---|---|
| Overensstemmelsesstandarder | UL, TUV, VCCI, BSMI, FCC, KC |
Producentgaranti | |
|---|---|
| Service & Support | Begrænset garanti - 3 år |
EK-M.2 NVMe Heatsink is a passive heatsink for M.2 NVMe Next Generation Form Factor SSDs. The heatsink is ribbed, so it`s not just a flat aesthetical cover, it also acts as a very effective passive cooler.
Compatible with all single-sided type 2280 M.2 NVMe SSDs
EK-M.2 NVMe Heatsink is a passive heatsink for M.2 NVMe Next Generation Form Factor SSDs. The heatsink is ribbed, so it`s not just a flat aesthetical cover, it also acts as a very effective passive cooler.
Compatible with all single-sided type 2280 M.2 NVMe SSDs
EK-M.2 NVMe Heatsink is a passive heatsink for M.2 NVMe Next Generation Form Factor SSDs. The heatsink is ribbed, so it`s not just a flat aesthetical cover, it also acts as a very effective passive cooler.
Compatible with all single-sided type 2280 M.2 NVMe SSDs
Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
Der tages forbehold for trykfejl og vejledende billeder.
