CPU Køler - side 18

ASUS ROG RYUO III 240 ARGB - CPU Vandkøling - Max 36 dBA

Noctua chromax.black NM-AM5/4-MP78 - processor cooler mounting kit - CPU Monteringsbeslag

Lian Li Galahad II Trinity 240mm White - ARGB - CPU Vandkøling - Max 36 dBA

Arctic TP-3 - thermal pad - Termisk Plade

Thermal Grizzly Minus Pad Extreme - 100 X 100 X 3 mm - Termisk Plade

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

MSI MAG CORELIQUID I360 - CPU Vandkøling

Thermal Grizzly Minus Pad 8 - 120×20×1mm - Termisk Plade

be quiet! LIGHT LOOP 240mm - CPU Vandkøling - Max 35 dBA

Thermalright Assassin Spirit 120 EVO White ARGB - CPU Luftkøler

be quiet! Pure Rock Pro 3 LX - CPU Luftkøler - Max 35 dBA

Arctic Alpine 17 CO - CPU Luftkøler

Thermal Grizzly Intel 1851 Mycro Direct-Die Pro RG

Vandkøler optimeret til Intel LGA1851 direct-die-montage med en nikkelbelagt kobberkøleplade med mikrofinner, lavgennemstrømningsmodstands jetkanaler og integreret RGB-belysning.

Intel 1851 Mycro Direct-Die Pro RGB V1 er designet til at placeres direkte på en deliddet Intel-CPU for at sende varme direkte ind i vandløkken, med et akryl- og aluminiumsdæksel og kontrollerbar ARGB-belysning.

• Direct-die-installation til LGA1851 CPU'er — kræver fjernelse af ILM og CPU-varmespreder; delidding sker på egen risiko
• Nikkelbelagt kobberkøleplade med mikrofinner og et jetsystem, konstrueret for lav flowmodstand
• Akryllag hærdet efter fræsning for at forhindre spændingsrevner under det anodiserede aluminiumslåg
• Digitale aRGB-LED'er under låget, kan styres via en 3-pin ARGB-header (+5V/DATA/GND); LED'erne belyser også G1/4-tilslutningerne
• G1/4-tommers hungevind til standard fittings
• Testet med KryoSheet og termiske pads — ekstra pad-tykkelse påvirkede kontakttrykket og viste ingen væsentlige temperaturforbedringer

Bygget til brugere, der ønsker en kompakt direkte kølevej fra CPU-die til et vandløb samtidig med mulighed for tilpasset RGB-belysning.

Thermal Grizzly Intel High Performance Heatspreade

The Intel High Performance Heatspreader V1 is an upgrade heatspreader for Intel processors. The nickel-plated copper heatspreader has a 207 percent larger, diamond-milled precision surface. This increased surface area compared to the original heatspreader enables maximum heat dissipation for air and water coolers, while the precision milling ensures extremely low surface roughness for the best contact with the heat sink.

The Intel High Performance Heatspreader V1 is compatible with the following processors:

Intel 12th Gen CPUs
Intel 13th Gen CPUs
Intel 14th Gen CPUs (200s)

Scope of delivery

1x Intel High Performance Heatspreader V1
4x pan-head screws UNC thread 3/8"
1x hexagon socket wrench 5/64"
1x angle wrench Torx T20
 

Thermal Grizzly Aeronaut - 7.8g - Kølepasta

Thermal Grizzly Polartherm X-8 - 40g

Termisk pasta Polartherm X-8 kombinerer højtydende, elektrisk ikke-ledende blanding af silikone, aluminium og aluminiumoxid i en pakke på 40 g til effektiv varmeafledning.

Udviklet som en alsidig allround-løsning til forskellige anvendelser; den lavviskøse formel trænger ind i mikroskopiske mellemrum for at forbedre varmeoverførslen mellem komponenter og køler, og kan påføres direkte eller med de medfølgende applikatorer og spartel for ensartet dækning.

• 40 g til ca. 70–80 påføringer
• Elektrisk ikke-ledende for at reducere risikoen for kortslutninger
• Nem påføring med medfølgende applikatorsæt og spartel
• Driftstemperatur fra -50 °C til 150 °C

Hjælper med at udfylde selv de mindste mellemrum for pålidelig, ensartet køling, særligt velegnet til CPU’er med lavere varmeudvikling.

be quiet! PURE ROCK 3 LX - CPU Luftkøler - Max 31 dBA

Thermal Grizzly Minus Pad Extreme - 100 X 100 X 1 mm - Termisk Plade

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Thermal Grizzly Minus Pad Extreme - 120 X 20 X 1.5 mm - Termisk Plade

Thermal Grizzly Minus Pad Extreme is a great choice for applications where renewing thermal paste is not an option. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay. Compared to Minus pad 8 the thermal conductivity was improved by about 260 %.

• Most excellent thermal conductivity
• No bleeding
• long-term stability
• high compression rate

The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm. See variants for various sizes and thickness. 

NB: Due to the consistency only one-time use is recommended 

Thermal Grizzly Minus Pad 8 - Termisk Plade

Noctua NH-U9DX i4 - CPU Luftkøler - Max 17 dBA

Lian Li HydroShift II OLED Curved 360TL - CPU Vandkøling - Max 33 dBA

Lian Li HydroShift II OLED Curved 360TL - CPU Vandkøling - Max 33 dBA

Lian Li GA II Lite 240P - CPU Vandkøling - Max 30 dBA

Cooler Master MasterLiquid 360 Atmos ARGB - CPU Vandkøling

MSI MAG CORELIQUID A13 240 - CPU Vandkøling