Dewalt Værktøj - side 2

Gulvafhøvling på batteri, 82 mm.

Diamond cutting disc

Hårdt hylster til værktøjssæt

The electronic variable speed control offers added tool control and enables the tool to be used at optimum conditions to suit the accessory and material. Electro-mechanical clutch reduces the "kickback" transmitted to the operator if the cutting disc jams. No volt release switch will prevent the unit starting when plugged in, even if the switch is in the on position. Switch must be consciously reset before power is delivered. Overload protection will prevent the unit over heating by shutting the unit off until the unit has cooled down. Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion and tracking. Anti vibration side handle to improve user comfort. Guard design allows guard adjustment without the use of tools, for increased flexibility. Fully leaded stator windings for increased motor durability. Pop off brushes protect the armature from damage at the end of brush life resulting in greater motor durability. The compact gear case allows access in confined areas. Abrasion protected motor for increased motor durability. Anti lock flange prevents flanges from permanently locking up and locking the disc on

Small Tough CaseSystem SetConnectable Case gør det muligt at stable flere sæt og låse sammen.

Stand design allows portability when the table saw is attached to the stand which increases productivity. Heavy-Duty kick stand allows the stand to balance upright for mobility and storage. Lightweight construction which improves the portability. Allowing the user to pull the saw behind him comfortably. Large Heavy-Duty wheels designed to easily roll over steps, kerbs, and jobsite debris. Folding legs with quick release levers which retract under the stand in a few seconds for easy and quick transport. For Use with DWE7491 and DW745 Table Saws

DeWALT DWST1-71228 værktøjskasse og kasse Plast Sort

Strong Magnetic Hold provides fastener retention, ideal for one-handed use. Spring Loaded Quick-Lock for quick and easy bit change. Impact Ready for maximised resistance to wear and shock.

Variabel lysindstilling til maksimal lysafgivelse eller øget køretid. 250-500 lumen med bred og jævn lysstråle. Op til 10 timers køretid. 9-positioners indtilling af lampens hoved til total kontrol over lysets retning. Udtrækkelig krog til ophængning af lampen
Batteri og lader sælges separat.

DeWALT DT20502-QZ tilbehør til elektrisk skruetrækker

DeWALT DCD996NT XR børsteløs kombinationsboremaskine er et kraftfuldt og alsidigt værktøj, der er perfekt til en lang række bore- og skrueopgaver, uden batteri eller oplader.

DCC018N-XJ XR 18 V trådløs minikompressor fra Dewalt er lille og kompakt, hvilket gør den ideel til oppumpning af cykel- og bildæk samt lignende genstande. Den har også en sugefunktion til indendørs og udendørs brug.

DeWALT DCD805NT-XJ bor 2000 rpm 1,34 kg

DeWALT DCK266P2 elektrisk skruetrækker & slagbor Gul

Autofremføringsskruetrækker, ledningfri, 1/4" unbrakosokkel 6.35 mm, 30 N·m, 18 V

Skruetrækkerbitsæt, 32 stykker, torx, phillips, pozidriv, hex, slot, længde: 25 mm

Slagbore adapter

Geringssavstander, længde: 3.83 m

Dette værktøjssæt er et godt valg for både professionelle og hobbyfolk, der værdsætter kvalitet og pålidelighed. Værktøjerne er kraftfulde og holdbare, hvilket gør dem perfekte til en række forskellige opgaver. De medfølgende kufferter muliggør praktisk og sikker opbevaring og transport af værktøjerne, og to batterier sikrer lange arbejdstimer uden afbrydelser. Dette er et virkelig værdifuldt sæt, der vil gøre mange opgaver lettere.

DeWalt DCE555N-XJ 18 V XR roterende værktøj er ideelt til fjernelse af gipsplader. Denne kraftfulde, kompakte 18 V børsteløse kulstofmotor giver høj arbejdseffektivitet og muliggør fjernelse af gipsplader uden brug af værktøj. Det ultratynde design giver øget komfort og kontrol i alle situationer. Batterier og oplader medfølger ikke.

DCK327P2T KITUDSTYR:
- 125 mm vinkelpoleringsmaskine, 18V Li-Ion, DCG405,
- boremaskine, XR LI-ION 18V DCD791,
- SDS+ slagboremaskine, XR Li-Ion, DCH263,
- 2 x 18V Li-Ion XR 5,0 Ah batterier, DCB184,
- DCB115 multispændingsoplader,
- 2 TSTAK-kasser

Fedtpistol, 10,8 V

DeWALT DCD800P2T-QW elektrisk skruetrækker & slagbor

Pop off brushes protect the armature from damage at the end of brush life resulting in greater motor durability. Soft start reduces movement of the tool on startup increasing user control. Small girth allow comfortable gripping resulting in superior ergonomics. Fully leaded stator windings for increased motor durability. New guard design allows guard fitment, adjustment or removal without the use of tools, for increased flexibility. The compact gear case allows access in confined areas. Abrasion protected field for increased durability. No-volt release switch prevents the unit from starting unitentionally when locked on. Switch must be consciously reset before power is delivered. Side positioned spindle lock gives greater protection to button when using in confined spaces. Anti lock flange prevents flanges from permanently locking up and locking the disc on. High effeciency motor design improves performance in demanding applications. Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion and tracking

New 12V tools and batteries are 100% compatible with your existing 10.8V products
33mm shorter than previous generation
Bright LED light on tool foot for high visibility in low light situations. State of charge battery pack allows users to quickly check battery level. Efficient brushless motor gives 15% more runtime than previous generation. Only 0.9kg (tool only) for ultimate portability and ease of use. 15 position adjustable torque control for consistent screw driving into a variety of materials. 10mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change